fusion temperature meaning in English
聚变温度
熔化温度
熔解温度
熔融温度
Examples
- Standard practice for determination of fusion temperature of dry electrostatic heat - fixing toners
干静电热定影的调色剂熔化温度的测定 - The result of the study testifies that the kindling temperature of lumps and scraps of pure magnesium is decided by their fusion temperatures ( the higher the fusing temperature , the higher the kindling temperature ) , and influenced by the heating velocity and the pressure of oxygen in the atmosphere ( the faster the heating and the lower the pressure , the lower the kindling temperature obtained from the experiment )
研究结果表明，所测块状纯镁和镁屑的燃点与其熔点有直接的对应关系(熔点高则燃点也相应增高) ，并受升温速度、环境中氧的分压的影响(升温速度越快、氧的分压越小，则所测燃点值越高) 。 - The imported transparent glaze fired at lower temperature was analysed semi - quantitatively by adopting emission spectroscope . the stripping of lead and cadmium from this transparent glaze fired at lower temperature in ceramic product was determined by atomic absorption spectroscope . the effect of chemical composition on the stripping of lead and cadmium was analysed . upon the author s opinion , the overproof lead stripping from the imported transparent glaze fired at lower temperature can only be settled by adopting lead - free glaze instead of adopting low - lead prescription . the author succeeded in developing an excellent lead - free transparent glaze fired at the lower temperature of 1000 1050 . the success is based on an inquiry into the feasibility of using such new agents of fusion as li2o and sro in replacement of pbo ; and on a study of the effects of the contents of sio2 ， al2o3 ， b2o3and other metallic oxides on such performances of glaze as coefficient of linear expansion , fusion temperature and transparency . it is also based on an analysis of coefficient of linear expansion of blank and glaze on an analysis of coefficient of linear expansion of blank and glaze on their correlation ; and on a study of technology for preparing glaze
采用发射光谱仪对进口低温透明釉进行半定量分析，并用原子吸收光谱仪测定其陶瓷制品的铅、镉的溶出量，分析化学成分对铅、镉溶出量的影响.结果表明,进口低温透明釉采用低铅配方不能解决铅溶出量的超标问题，只有采用无铅釉才能解决.探讨用氧化锂和氧化锶等新型熔剂完全代替氧化铅的工艺，研究釉料中氧化硅、氧化铝、氧化硼和各种金属氧化物的含量,对釉的线膨胀系数、熔融温度和透明度等性能的影响.分析坯料、釉料的线膨胀系数及其相互关系和釉料制备的工艺，研制出优质的1000 1050低温无铅透明釉